It becomes then easy to find the fault sourceby justfollowing the path indicated by the fault indicators. spends her free time reading, cooking, and exploring the great outdoors. The Status SMS is sent at fixed regular intervals (intervals can be configured as per client requirement), the SMS contains the location (up to 30 characters) of the equipment, working status of the DTU, DTU battery voltage, load current of all the individual phases. High Sensitivity 14A. Specially made Lithium Iron Phosphate Batteries are used in the DTU which have a life time of up to 8 years and are maintenance free. Power transmission systems also use fault indicators. Organic Glass Protection, Amorphous Silicon (30 years of service life), Solar Panel Capacity Solar Panel Capacity, Static Power consumption Static Power consumption, To 5 mobile numbers (In word format, along with location and fault details), Up to 10 Years or 5000 Hours of LED Indication, Diameter of the bare wire on which FPI is installed.
The Fault Indicating System can transmit the information directly to the concerned officials via SMS (GSM Network). Mary has a liberal arts degree from Goddard College and The Fault Indicating System can send SMS to up to 5 Officials as per the client requirement. In this case, the fault indicator sends a message to the facility where people oversee the safety of the system, indicating that there is a fault and pinpointing the location of the fault. Streamer Electric AG uses cookies to personalize services and improve the usability of the website. One of the advantages to using a fault indicator is that it can be used to direct electrical crews to the precise location of a fault, instead of forcing them to wander along a length of line in an attempt to find out where the problem is occurring. Switzerland.
Float Power Systems & Controls have no personal claim on any of the Copyright. For large and highly automated facilities, the fault indicator may feed back to a monitoring station, where it will alert someone who keeps an eye on equipment performance remotely. Regular update of parameters to SCADA Servers. The devices will have a visual indication and can send the information via SMS/GPRS. high indication visibility, thanks tohigh-brightness LED; failure fault information transmitted straight to the control station, using the GSM-connection orGPRS; auto setting feature: the fault indicator detects the normal electromagnetic field and set itself compare to it. During a fault the electromagnetic field will quickly shift and become unbalanced. The status of the Line, whether the line is On or Off. Time Reset - after a specified interval of time (configured as per client requirement) if the line is not restored within that period. Fault Occurrence Indication, separate indication for Short Circuit Fault and Earth Fault, along with the phase on which the fault has occurred.
Disclaimer All products / Technical Specification/details-Project Details Specification Sole Property of Manufactures / Suppliers. Financial benefit example of using TRANSEC, The fault indicator should be placed on key locations on the line like at the beginning of branches, In case of a fault, the short circuit loop will go from the fault source to the supplying substation, Each fault indicatorlocated on that path will detect and indicate the fault. The F.I.S has intelligent sensors to detect the in-rush current and does not indicate it as a fault. Fault indicators are also used in test circuits and in quality control for electrical components, appliances, and equipment. A fault indicator is an electrical safety device which indicates when a fault is present. The fault indicator sounds or lights up to indicate that all is not well with a circuit, and that the problem should be addressed before the circuit is passed for use or sale. The Fault Indicating System transmits to the SCADA Centre. The F.I.S indicates the occurrence of fault, by local indication and by SMS directly to the officials and also to the SCADA Centre. When reliable and fast indication of the failure section is needed after a short circuit, the fault detectors are a must-have. If the load is changing, the fault indicator adapts to it. What Should I do About a Tripping Circuit Breaker. The F.I.S monitors, records, and transmits the line for the following data, Load Current, Electric Field Value, Line Temperature, Ambient Temperature, Fault Current (Maximum of 1200 A), Line Status (On / Off). Masanserstrasse 17 CH-7000 Chur Subscribe to our newsletter and learn something new every day. The FPI can be installed and uninstalled (removed) online, without disrupting the power supply using a hot stick and installation tool. Low Sensitivity 70A. Amazon Doesn't Want You to Know About This Plugin. If the device detects a fault in the circuit, it may reset, cutting off power until someone fixes it, or it may light up, indicating that a fault is present and that there may be a safety issue. The Fault Indication SMS is sent when there is an occurrence of the fault on the line, the SMS contains Date and Time Stamp of the fault occurrence, type of fault (Short Circuit or Earth Fault), the phase on which the fault has occurred. The F.I.S is self-sufficient and does not require any external source of power, it has an inbuilt solar panel which acts as its power source and it has a backup of up to 10 days even in cloudy conditions. The F.I.S is capable of identifying both Phase to Phase as well as Phase to Earth Faults. Time Reset Configurable as per client requirement to reset after a specified interval even if power has not been restored. The Restoration SMS is sent when the line is restored, the SMS contains the location (up to 30 characters) of the equipment, DTU battery voltage, load current of all the individual phases. Fault Indicating System is designed to work even in Zero load conditions which is a requirement for Wind Mills & Solar Power Plants.
You should be receiving an order confirmation from Paypal shortly. The Fault Indicating System (F.I.S) monitors the line 24 X 7 for fault occurrence. The Fault Indicating System provides an advantage over any other equipment, since it can be integrated with old SCADA Centres which use IEC 60870-5-101 Protocol, as well as new age SCADA Centres which use IEC 60870-5-104 Communication Protocols. The F.I.S indicates when the line has been restored, by local indication (reset of fault indication), by SMS directly to the officials and also to the SCADA Centre. These problems can grow even worse in industrial circuits, where high-power equipment may be connected. The Load Current of all the individual phases, The Electric Field Value of all the individual phases, The Line Temperature of all the individual phases. Current Reset - on restoration of load current in the line.
All the components of the Fault Indicating System are Anti-rust, Corrosion resistant, and UV resistant, hence suitable for long time outdoor exposure, ensuring long life. By reporting each incident via visual or remote signal, the fault indicators reduce substantially the time and costs needed to find out the source of a fault. When it is needed to equipthe line with fault indicators, the pole mounted range from Streamer Electric AG is acost effective solution. Fault circuit indicator is used to detect short circuit failures or phase-to-earth faults in electric power distribution networks. Some fault indicators also sound a tone, which can be especially useful for visually impaired people who may not otherwise be aware that there is a problem which requires their attention. Learn about a little known plugin that tells you if you're getting the best price on Amazon. All governmental sanctions/licenses/approvals as may be. applicable for procurement of products is the sole responsibility of the customer. In a home, a fault indicator can be integrated into a receptacle or power strip. The Fault Indicating System communicates with the SCADA Centre via GPRS. 127/11, Bull Temple Road,Kempegowda Nagar, FLOAT POWER SYSTEMS & CONTROLS 2009 - 2022, All details available on website is for information purpose only. a. Automatic Load Current Reset on restoration of power. Ever since she began contributing to the site several years ago, Mary has embraced the Three types of SMS are sent to the officials. All communications in the Fault Indicating System are wireless, ensuring hassle free installation and maintenance free operation. When the field is balanced, the fault indicator considers it as a normal situation thanks to the auto setting feature. b. The charging voltage of the solar panel in DTU, Fixed Interval (Configurable as per client requirement), Change in Parameter values (example: more than 3A change in load current), mason.script.plugins.twitterTweetPlugin.tweet. The Fault Current with separate measurement for each phase on which the fault has occurred. exciting challenge of being a AboutMechanics researcher and writer. The F.I.S continuously monitors the line and at fixed intervals provides the status of the line to the SCADA Centre and by SMS directly to the officials (load current). The F.I.S has a proprietary algorithm which allows it to automatically choose the right settings for each line Manual setting is not required Hence no erroneous indication due to wrong settings. Fault indicators are used in a variety of electrical systems, and there are a number of different styles available. Some fault indicators are also programmed to interrupt power until the fault can be resolved. Settings change automatically during peak load and normal load providing accurate results in any conditions. For sensitive electronics such as avionics systems, fault indicators may be included among the warning indicators which are used to alert operators to problems with the system. The conductors electromagnetic field issensed by the device. Is Amazon actually giving you the best price? They are highly regarded as one of many options which can increase the safety and operability of an electrical system. In these situations, a fault indicator can be used to monitor the power supply for a facility or on specific circuits to identify faults when they occur. This change is detected by the fault indicator which will go in alarm mode. This little known plugin reveals the answer. The Fault Indicating System transmits the Data to SCADA Centre by using IEC 60870-5-101 OR IEC 60870-5-104 Communication Protocols. The fault indication is reset automatically on restoration of power OR after a fixed interval of time if the power is not restored. A fault on a household circuit can cause a variety of problems.